Tips of the Trade
Here you will find a small collection of information that may be helpful for you.
Choosing the Correct Applicators and Tools
Choosing and using the recommended applicator or tool is essential to achieving the desired final result. They will eliminate costly call-backs or repairs from either too much or too little material being used with an incorrect applicator.
Please see our product catalog and look for Applicators/Tools under each product listing to help guide you for the correct applicator or tool for your specific job.
Do you know your voltage?
Keeping your big machine running at peak performance means always operating with the voltage in the "safe" range, between 220v - 240 v. Anything outside of that range, either below or above it, will create heat that is damaging to the motor and windings.
Maintaining good plug connections and grounding, proper drum pressure, correct walking speeds and using a voltage booster will also help to eliminate any undue motor wear.
Contaminants Prior to Recoating Wood Floors
Contractors often avoid recoating wood floors due to unknown contaminants that can be present on wood floors. Pallmann Clean Strong is a cleaning emulsion specially formulated to remove surface contamination from wood floors including dirt, grease, acrylics and most maintenance products prior to recoating wood floors.
Regardless of your finish choice, Pallmann Clean Strong should be used prior to all recoating procedures to greatly enhance the success rate of adhesion.
